ISO 51115 thrust ball bearings

Width T(mm):15; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Height H(mm):25 ～ 40; Type:Bearings with Housin; Lateral Width L(mm):40; Height Indication:Height Selection; RoHS:6; Number of Bearings:Single;

Holder Width(inch):1; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Days to Ship:14 Days; Bearing Part Number:6001; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Bearing Retained:No; Seals:ZZ (Double Shield); Shape:Flange Type;

d:50 mm; E:25 mm; H1:21 mm; A1:35 mm; G:M6x1; A:60 mm; Weight:2.8 kg; S:19 mm; Recommended tightening torque for set screw:22 Nm; J:95 mm;

E:25 mm; Recommended tightening torque for set screw:8 Nm; T min.:-20 °C; J:90 mm; H:54.2 mm; Weight:2.1 kg; Designation of housing:PA209N-; L:120 mm; d:44.45 mm; H2:108 mm;

Dz:120 mm; SW:4.76 mm; d:57.15 mm; Recommended tightening torque for set screw:16.8 Nm; C:52.5 kN; C0:32.8 kN; A5:38.8 mm; S:14.9 mm; T max.:100 °C; Z:60.8 mm;

A:34 mm; J1:66 mm; N:15mm; Designation of bearing:US207-23G2T04; d:36.51 mm; A2:42.5 mm; A1:16 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; H:161 mm;

B2:17.5 mm; r:1.1; C0:15.2 kN; G:M8x1; S:9.5 mm; SW:4 mm; Weight:0.47 kg; Recommended tightening torque for set screw:11.5 Nm; T min.:-20 °C; d:35 mm;

Outer Ring:With Outer Ring; Outer Ring Type:Flat; Outer Ring Type:Flat; RoHS:6; Series:Standard; Raceway Ring Shape:Needle Roller; Outer Ring:With Outer Ring; D:28; Specifications/Environment:Standard; Load Direction:Radial;

Width T(mm):30; Type:Bearings with Housin; Shape:Flange Type; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Number of Bearings:Double; Flange Shape:Round Type; Bearing Part Number:625; Flange O.D. H(φ):38;

Days to Ship:7 Days; Holder Surface Treatment:Electroless Nickel P; Bearing I.D. d(mm):10; Number of Bearings:Double; Flange O.D. H(φ):47; Width T(mm):25 ～ 40; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; RoHS:6;

r:1.1; d:38.1 mm; T max.:100 °C; B:49.2 mm; Recommended tightening torque for set screw:8 Nm; C0:18.2 kN; Weight:0.68 kg; SW:3.97 mm; S:19 mm; C:21 mm;

A1:15 mm; d1:50 mm; J:95 mm; C0:15.2 kN; Weight:1.71 kg; G:M6x1; s1:35.75 mm; Designation of housing:F306-; A:32 mm; Designation of bearing:EX306-18G2T20;

Type:Bearings with Housin; Lateral Width L(mm):47; Holder Surface Treatment:Electroless Nickel P; Height H(mm):20 ～ 30; Shape:T-Shaped; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Mount Type:Base Face Type; RoHS:6;

H2:41 mm; B1:38.9 mm; L1:225 mm; d1:51.1 mm; T max.:200 °C; A:21 mm; s1:30.2 mm; C0:15.2 kN; C:25.7 kN; SW:4 mm;

Shape:Bottom Mount; Lateral Width L(mm):42; Bearing I.D. d(mm):12; Type:Bearings with Housin; Number of Bearings:Single; Height H(mm):25 ～ 40; Width T(mm):16; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Bearing Retained:Yes (with retaining;